Front Controls - Case 570T Operator's Manual

FORWARD CONTROLS

Front controls

Starter switch key
WARNING
Misuse hazard!
Before starting the engine, make sure you are
fully aware of the location and the function of
each control.
Failure to comply could result in death or se-
rious injury.
Located on the right of the operator's seat (with seat in
loader attachment position), this switch has three posi-
tions:
Position "1": OFF
Position "2": Ignition ON
Position "3": START
Horn button
To sound the horn, press the button (1) on the combination
switch (3) on the backhoe lever console.
Throttle lever
The throttle lever (2) enables the engine speed to be in-
creased or decreased during backhoe operation.
The knob provided at the top of the lever acts as a lock.
Lift the knob and move the lever to increase the speed.
Release the knob and lower the lever to decrease the
speed.
NOTICE: Never use the throttle lever (2) during travel on
public highways.
3 - CONTROLS AND INSTRUMENTS
W0226A
3-5
1
PTIL12TLB0056AB
2
PTIL12TLB0057AB
3
PTIL12TLB0430AB