Prov-Add - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference

prov-add

The prov-add command adds a component to the Cisco HSI.
Syntax Description
MML name
param name
param value
Usage Guidelines
To define more than one parameter, enter additional param name=param value descriptions on the
command line. See
names, and their associated values.
Examples
The command shown in the following example adds a provisioning element with the MML name ras,
parameter name maxFail, and value 3:
gw mml> prov-add:name=ras,maxfail=3
H323 Signaling Interface Sun Jan 7 15:15:02 2001
M SUCC
Successfully added provisioning element(s):
MML Name : ras.
Parameter: maxFail.
Value : 3.
Related Commands Command
prov-cpy
prov-dlt
prov-ed
prov-exp
prov-rtrv
prov-sta
prov-stp
OL-4806-01 Rev. A14
prov-add:name=MML name,param name=param value,...
MML name for the element you are adding. Valid MML names are:
•
•
•
•
•
•
The name of a valid configuration parameter for the specified name.
The value you want to assign to the parameter.
Chapter 3, "Provisioning the Cisco HSI,"
sys_config_static
sys_config_dynamic
h323_sys
ras
h245
q931
Description
Activates the configuration settings in the current provisioning
session.
Deletes a provisioned component.
Modifies a provisioned component.
Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
Retrieves information about an existing provisioning session.
Establishes a provisioning session.
Terminates either a specified provisioning session or the current
provisioning session.
Cisco H.323 Signaling Interface User Guide
for the list of MML names, parameter
prov-add
A-13