Setting The Ftp Passive Mode And Lpr/Smtp Timeout; Index - YOKOGAWA WT3002E User Manual

Explanation
IM WT3001E-51EN

5.9 Setting the FTP Passive Mode and LPR/SMTP Timeout

• Turning ON/OFF the FTP Passive Mode
5.
Press the cursor keys to select FTP Passive.
6.
Press SET to select ON or OFF.
• Setting the LPR Timeout Value
5.
Press the cursor keys to select LPR Time Out.
6.
Press SET. The timeout value entry box appears.
7.
Press the cursor keys to set the timeout value.
8.
Press SET or ESC to close the box.
• Setting the SMTP Timeout Value
5.
Press the cursor keys to select SMTP Time Out.
6.
Press SET. The timeout value entry box appears.
7.
Press the cursor keys to set the timeout value.
8.
Press SET or ESC to close the box.
Special settings related to the FTP client, LPR, and SMTP are entered.Set these items
as necessary.
• Turning ON/OFF the FTP Passive Mode
Turn this function ON when using this instrument behind a firewall
passive mode. The default setting is OFF.
* A firewall is furnished on a system that has security features. It prevents intrusion
from the outside into the network system.
• Setting the LPR Timeout Value
This instrument closes the connection to the printer if there is no response from the
printer for a certain period of time (timeout time) while it attempts to access the printer.
You can set the timeout value in the range of 0 to 3600 s. The default value is 15 s.
*
• Setting the SMTP Timeout Value
When a mail server is accessed from this instrument and connection cannot be
established after a certain period of time (timeout time), this instrument decides that
the connection to the mail server is not possible and closes the connection.
You can set the timeout value in the range of 0 to 3600 s. The default value is 15 s.
* SMTP (Simple Mail Transfer Protocol) is a protocol that resides above the TCP/IP
layer and is used by the e-mail transmission system.
1
2
3
4
5
6
7
8
9
*
that requires the
10
11
12
13

Index

5-27