Table of Contents
Advertisement
2.5 Auto Print
Integration Synchronized Auto Print
2-14
• Setting the Print Interval
5.
Press the cursor keys to select the hour, minute, or second box of the print
interval.
6.
Press SET to display the entry box.
7.
Press the cursor keys to set the hour, minute, or second that you selected in step 5.
8.
Press SET or ESC to close the box.
9.
Repeat steps 5 to 8 to set the hour, minute, and second.
• Executing the Auto Print
Check that the roll paper is loaded properly, and that the printer unit is pushed into the
correct position.
10.
Press the Auto Print ON soft key. If Auto Print is turned ON while integration is
not started, the PRINT key blinks, and this instrument enters the Ready state.
When integration starts, the PRINT key illuminates (stops blinking), and the auto
print is started. If Auto Print is turned ON while integration is in progress, the
PRINT key illuminates, and the auto print starts
• Aborting the Print Operation
11.
Press PRINT while the print operation is in progress to abort the operation.
• Terminating the Auto Print
• Stopping the Auto Print
11.
Press the Auto Print OFF soft key while auto print is in progress to stop the auto
print. The PRINT key turns OFF.
• Automatically Stopping the Auto Print
11.
When the integration stops, auto print also stops. The PRINT key blinks.
12.
Press the Auto Print OFF soft key to turn the PRINT key OFF.
IM WT3001E-51EN
Advertisement
Table of Contents
