Checking The Ethernet Communication Function (Option) Availability And Mac Address - YOKOGAWA WT3002E User Manual

5.8 Checking the Ethernet Communication Function
(Option) Availability and MAC Address
Procedure
Explanation
IM WT3001E-51EN
DISPLAY
RESET SET
NUMERIC
Cursor keys
OTHERS
PAGE PAGE ITEM
LOWER ITEM
To exit the menu during operation, press ESC located above the
SCALING LINE FILTER AVG
soft keys.
MOTOR FREQ
SET FILTER
In the procedural explanation below, the phrase "press the cursor
HRM SET MEASURE SYNC SOURCE
keys" may be used. This phrase refers to the procedures for
CURSOR NULL
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User's Manual,
FILE IMAGE SAVE STORE
IM WT3001E-01EN.
MENU STORE SET
PRINT MISC HELP
MENU
1.
Press MISC to display the Misc menu.
2.
Press the System Overview soft key to display the System Overview window.
The availability of the Ethernet communication function (option) and the MAC address
information are displayed in the System Overview window.
• Availability of the Ethernet Communication Function (Option)
The availability is displayed under Ethernet in the System Overview window.
• If Yes is displayed, the Ethernet communication function is available.
• If No is displayed, the Ethernet communication function is not available.
• MAC Address
The MAC address is a unique address that is pre-assigned to this instrument. The
MAC address is displayed under Mac Address in the System Overview window.
Note
The MAC address is displayed only on products with the Ethernet communication function. If
the MAC address is displayed as "xxxxxx_xxx_xxx" even though the Ethernet communication
function is installed, contact your nearest YOKOGAWA dealer.
ITEM & ELEMENT
UPDATE
WAVE U / I / P
WP/q/
SINGLE
TIME
FORM USER ELEMENT INTEG
LOWER FORM USER SET ALL
REMOTE
HOLD LOCAL
RATE
CAL
SHIFT
START STOP
5-25
1
2
3
4
5
6
7
8
9
10
11
12
13
Index