YOKOGAWA WT3002E User Manual page 225

12.5 Executing the Normal Voltage Fluctuation and Flicker Measurement
12-24
• Flow Chart of the Normal Flicker Measurement
(Transition Diagram of the Flicker Measurement Status]
Cancel initialization [Reset]
(see section 12.5)
Abort measurement [Reset]
(see section 12.5)
Abort measurement [Reset]
(see section 12.5)
Re-measure [Reset]
(see section 12.5)
Reference sections are indicated in parentheses.
Soft keys that you operate are indicated in brackets.
Change the measurement conditions
(see section 12.3)
Reset
Change the judgement conditions
(see section 12.4)
Initialize the measurement [Initialize Exec]
(see section 12.5)
Initializing
Initialization complete
Ready
Start measurement [Start] (see section 12.5)
Start
Measurement complete
Change the judgement conditions
Complete
and re-judge (see section 12.5)
IM WT3001E-51EN