Table of Contents
Advertisement
5.2 Setting TCP/IP
5-4
• Turning ON the DNS
16.
Press the cursor keys to select DNS.
17.
Press SET. A DNS selection box appears.
18.
Press the cursor keys to select ON.
19.
Press SET to confirm the DNS ON setting.
• Entering the Domain Name
Enter the domain name of the system or network to which this instrument belongs.
20.
Press the cursor keys to select Domain Name.
21.
Press SET. A keyboard appears.
22.
Use the keyboard to enter the domain name of the network to which this
instrument belongs.
For keyboard operations, see section 3.14 in the User's Manual IM WT3001E-01EN.
• Entering the Address of the Primary DNS Server
23.
Press the cursor keys to select DNS Server1.
24.
Enter all four octets of the primary DNS server address in the same fashion as the
IP address.
• Entering the Address of the Secondary DNS Server
Enter the information if the system or network to which this instrument belongs uses
a secondary DNS server. If a secondary server is not used, proceed to "Entering the
Primary Domain Suffix."
25.
Press the cursor keys to select DNS Server2.
26.
Enter all four octets of the secondary DNS server address in the same fashion as
the IP address.
• Entering the Primary Domain Suffix
Enter the information if a domain suffix is required.
27.
Press the cursor keys to select Domain Suffix1.
28.
Enter the primary domain suffix in the same fashion as the domain name.
• Entering the Secondary Domain Suffix
Enter the information if a secondary domain suffix is present.
29.
Press the cursor keys to select Domain Suffix2.
30.
Enter the secondary domain suffix in the same fashion as the domain name.
IM WT3001E-51EN
Advertisement
Table of Contents
