YOKOGAWA WT3002E User Manual page 171

10.2 Various Settings Related to Waveform
Computation
IM WT3001E-51EN
A portion of the settings related to waveform computation is common with the "waveform
display in normal measurement mode" and "FFT mode." The settings described in
sections 10.3 to 10.5 are those specific to waveform computation. Set these items first.
• Selecting the waveform computation mode
• Setting the waveform equation
• Setting the scale, unit, and label of the computed waveform
The settings below are common with the waveform display of normal measurement
mode. See the respective sections below in the User's Manual IM WT3001E-01EN.
• Selecting the waveform to be displayed
• Setting the time axis
• Setting the trigger
• Zooming vertically and moving the vertical position
• Waveform display on divided windows
• Selecting the display interpolation and graticule
• Turning ON/OFF the scale value and waveform label
• Cursor measurement
If you change settings that are common with the "waveform display in normal measurement
mode" and "FFT mode" in waveform computation mode, the waveform display settings
in normal measurement mode and FFT mode are also changed. For example, if you
change the time axis to 20 ms/division in waveform computation mode, the time axis of
the waveform display in normal measurement mode is also changed to 20 ms/division.
1
2
3
Section 10.3
Section 10.4
Section 10.5
4
Section 6.2
5
Section 6.3
Section 6.4
Section 6.5
6
Section 6.6
Section 6.7
Section 6.8
7
Section 6.9
8
9
10
11
12
13
Index
10-3