Auto Print - YOKOGAWA WT3002E User Manual

2.5

Auto Print

Procedure
2-12
RESET SET
Cursor keys
PAGE PAGE
SCALING LINE FILTER AVG
MOTOR
FREQ
SET FILTER
HRM SET MEASURE SYNC SOURCE
CURSOR NULL
FILE IMAGE SAVE STORE
MENU STORE SET
PRINT MISC HELP
MENU
1.
Press SHIFT+PRINT (MENU) to display the Print menu.
• Setting the Print Destination, Output Format, Etc.
2.
Set the print destination to the built-in printer, and set the output format according
to the Procedures given in sections 2.3 and 2.4.
• Selecting the Synchronization Mode
3.
Press the Auto Print Setting soft key to display the Auto Print Setting menu.
4.
Press the cursor keys to select Synchronize.
5.
Press SET to select Timer or Integrate.
If you select Timer, proceed to step 6 in "Print Timer Synchronized Auto Print" on
the next page.
If you selected Integrate, proceed to step 6 in "Integration Synchronized Auto
Print" on page 2-14.
DISPLAY ITEM & ELEMENT
NUMERIC WAVE U / I / P
WP/q/
OTHERS
TIME
ITEM FORM USER
LOWER ITEM LOWER FORM USER SET
To exit the menu during operation, press ESC located above the
soft keys.
In the procedural explanation below, the phrase "press the cursor
keys" may be used. This phrase refers to the procedures for
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User's Manual,
IM WT3001E-01EN.
UPDATE
HOLD
RATE
SINGLE
CAL
ELEMENT INTEG
START STOP
ALL
IM WT3001E-51EN
REMOTE
LOCAL
SHIFT