Turning On/Off The Timeout Warning Display Of The Pll Lock - YOKOGAWA WT3002E User Manual

8.4 Turning ON/OFF the Timeout Warning Display
of the PLL Lock
Procedure
Explanation
IM WT3001E-51EN
DISPLAY
RESET SET
NUMERIC
Cursor keys
OTHERS
PAGE PAGE
LOWER ITEM
To exit the menu during operation, press ESC located above the
SCALING LINE FILTER AVG
soft keys.
MOTOR FREQ
SET FILTER
In the procedural explanation below, the phrase "press the cursor
HRM SET MEASURE SYNC SOURCE
keys" may be used. This phrase refers to the procedures for
CURSOR NULL
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User's Manual,
FILE IMAGE SAVE STORE
IM WT3001E-01EN.
MENU STORE SET
PRINT MISC HELP
MENU
1.
Press HRM SET to display the Harmonics menu.
2.
Press the PLL Input Warning Msg soft key to select ON or OFF.

• Turning ON/OFF the Timeout Warning Display of the PLL Lock

You can select whether to display a timeout warning of the PLL lock when the PLL
circuit in this instrument cannot detect the PLL source frequency within the detection
period. This function is valid only in wide bandwidth harmonic measurement mode.
• ON: Displays the alert message.
• OFF: Initializes the memory without displaying the alert message.
• PLL Detection Period
• When the PLL source is not set to Smp Clk:
• When the PLL source is set to Smp Clk:
ITEM & ELEMENT
WAVE U / I / P
WP/q/
TIME
ITEM FORM USER ELEMENT
LOWER FORM USER SET ALL
5 s
40 s
REMOTE
UPDATE
HOLD LOCAL
RATE
SINGLE
CAL
INTEG SHIFT
START STOP
8-5
1
2
3
4
5
6
7
8
9
10
11
12
13
Index