YOKOGAWA WT3002E User Manual page 121

7.4 Changing the Displayed Items of Numeric Data
Selecting the Displayed Items from the Menu
7-18
1.
Press ITEM to display the Numeric menu.
• Selecting the Item to Be Changed
2.
Press the Item No. soft key.
3.
Press the cursor keys to select the item to be changed. The item to be changed
is highlighted.
• Changing the Measurement Function
4.
Press the Function soft key to display the measurement function selection box.
5.
Press the cursor keys to select any of the measurement functions starting with
None.
6.
Press SET. The symbol for the selected measurement function and the numeric
data are displayed at the highlighted position.
• When the display mode is set to Single List or Dual List, only the measurement
functions that contain harmonic order data can be selected. (U, I, P, S, Q, λ, φ, φU, φI, Z,
Rs, Xs, Rp, and Xp)
• Changing the Element/Wiring Unit
7.
Press the Element/Σ soft key to display the element/wiring unit selection box.
8.
Press the cursor keys to select any of the elements/wiring units starting with
Element1.
9.
Press SET. The symbol for the selected element number or wiring unit and the
numeric data are displayed at the highlighted position.
• Changing the Order
10.
Press Order soft key.
11.
Press the cursor keys to set the order. The specified harmonic order and the
numeric data are displayed at the highlighted position. This completes the
procedure for changing the displayed items using the menu.
• When the display mode is set to Single List or Dual List, you do not have to set the
order.
IM WT3001E-51EN