Table of Contents
Advertisement
8.2
Various Settings Related to Wide Bandwidth
Harmonic Measurement
8-2
Most of the operations of wide bandwidth harmonic measurement mode are common
with the harmonic measurement of normal measurement mode. A setting specific to the
wide bandwidth harmonic measurement is the ON/OFF setting of the timeout warning
display of the PLL lock. For these settings, see the respective sections below. The
underlined sections are settings specific to the wide bandwidth harmonic measurement.
• Selecting the wide bandwidth harmonic measurement mode
• Changing the number of displayed items of numeric data and Section 7.3
scrolling the display
• Changing the displayed items of numeric data
• Selecting the PLL Source
• Setting the measured order
• Selecting the distortion factor equation
• Turning ON/OFF the timeout warning display of the PLL lock
• Setting the anti-aliasing filter
• Displaying the bar graph and making cursor measurements
• Displaying vectors
Section 8.3
Section 7.4
Section 7.5
Section 7.6
Section 7.7
Section 8.4
Section 7.8
Section 7.9
Section 7.10
IM WT3001E-51EN
Advertisement
Table of Contents
