YOKOGAWA WT3002E User Manual page 50

2.5 Auto Print
2-16
• Setting the Print Interval
Set the time interval for carrying out auto print in hour:minute:second. The selectable
range varies depending on the data update interval as follows:
• When the data update interval is less than 10 s: 00:00:10 to 99:59:59
• When the data update interval is greater than or equal to 10 s: 00:01:00 to 99:59:59
In integration synchronized auto print, the print interval is rounded up to an integer
multiple of the data update interval. For example if the data update interval is set to 5
s and the print interval is set to 21 s, the print interval is set to 25 s.
Note
The print interval can be set to a value smaller than the minimum value indicated above. If an
invalid time is specified, an error message is displayed at the time of execution of the auto print.
Reset the reservation time in this case.
• Limitations When Auto Print is in Progress
• To use the auto print function, you must set the print destination to the built-in
printer and set the output format and other settings. For the Procedure, see section
2.3 or 2.4.
• The settings of the following functions cannot be changed while auto print is in
progress.
The synchronization mode, reservation time and interval of auto print; printer output
items; wiring system; crest factor; synchronization source; data update interval;
setting or execution of store/recall; and loading of setup parameter files
• If the following operation is carried out when auto print is to be executed, the auto
print is not executed.
• Formatting the storage medium
• Accessing the storage medium such as saving data or settings
• Carrying out an FTP server command
• Printing manually or through communication commands
• If the print format is set to Hard Copy and an error or WARNING message is shown
on the screen when the auto print is executed, the screen image including the
message is printed. The message is automatically cleared after the printing. This
prevents the screen images from being covered by the message on subsequent
auto prints.
IM WT3001E-51EN