YOKOGAWA WT3002E User Manual page 208

Explanation
Standard edition number
Measurement count
Elapsed time in an
observation period
Display element
Voltage range
(target voltage/target frequency)
Rated voltage
Voltage frequency
Judgement limit
Observation period indicator
Judgement by measurement item
IM WT3001E-51EN
12.2 Setting the Voltage Fluctuation and Flicker Measurement Mode
• Display Related to the Voltage Fluctuation and Flicker Measurement
The figure below is a display example of normal flicker measurement.
• Flicker Measurement Status
The following five flicker measurement statuses are available.
Display Meaning
Reset
Condition in which the measured value is reset and initialization can be executed.
Initializing Initializing
Ready Initialized condition in which measurement can be started.
Start Measurement in progress. The elapsed time is displayed to the right.
Complete Complete
• Connecting to the Harmonic/Flicker Measurement Software
If you use the Harmonic/Flicker Measurement Software, this instrument automatically
switches to voltage fluctuation and flicker mode.
• Limitations on Changing the Measurement Mode
This instrument cannot switch to voltage fluctuation and flicker measurement mode in
the following conditions.
• When the master/slave synchronization measurement is set to slave.
• When the integration function is started or stopped.
• When auto print is ON.
• While storage or recall operation is in progress.
• While the storage medium is being accessed.
• While saving waveform sampling data to the storage medium.
Measured element
Total judgement
Display element
judgement
Flicker
measurement status
Elapsed
measurement time
Index
12-7
1
2
3
4
5
6
7
8
9
10
11
12
13