Table of Contents
Advertisement
4.1 Names and Functions of the Parts of the RGB Video Signal (VGA) Output
Connecting to the Monitor
4-2
1.
Turn OFF this instrument and the monitor.
2.
Connect this instrument and the monitor using an analog RGB cable.
3.
The screen of this instrument appears on the monitor when both this instrument
and the monitor are turned ON.
Note
•
The RGB video signal is constantly output from the video signal output connector.
•
The monitor screen may flicker if this instrument or another instrument is brought close to
the monitor.
•
The edge of the screen may drop out depending on the monitor type.
IM WT3001E-51EN
Advertisement
Table of Contents
