Table of Contents
Advertisement
2.3 Printing Screen Images on the Built-in Printer
Explanation
2-8
• Setting Comments
6.
Press the Comment soft key. A keyboard appears.
7.
Use the keyboard to enter the comment.
For keyboard operations, see section 3.14, "Entering Values and Strings" in the User's
Manual IM WT3001E-01EN.
• Executing the Print Operation
Check that the roll paper is loaded properly, and that the printer unit is pushed into the
correct position.
8.
Switch to the screen you wish to print.
9.
Press PRINT to print the screen image.
• Aborting the Print Operation
10.
Press PRINT while the print operation is in progress to abort the operation.
Screen images can be printed on the built-in printer (option).
• Setting Comments
The comment that you entered is displayed at the bottom of the screen. The comment
on the screen is also printed as a screen image.
Number and Types of Characters That Can Be Used
Item
Number of Characters
Comment
0 to 20 * characters
* More than 20 characters can be entered for the comment, but only the first 20 characters are
displayed on the screen.
Note
If the roll paper runs out while printing, an error is displayed, and the screen image data being
printed is discarded. If this happens, load a new roll paper, show the screen you wish to print
again, and execute the print operation.
Characters That Can Be Used
Characters that are displayed on the keyboard and
spaces
IM WT3001E-51EN
Advertisement
Table of Contents
