Menu Structure Of Setting Mode - YOKOGAWA VigilantPlant mR20000 Operation Manual

Menu Structure of Setting Mode

Range
Bias
Calibration
Alarm
Unit
Chart
Clock
Aux
Math
Batch
IM 04P02B01-02E
References to the µ R20000 Recorder User's Manual (IM 04P02B01-01E) are given in
parentheses.
CH Volt
(section 5.1)
TC
RTD
1-5V
Scale
Delta
DI
SQRT
Skip
CH Bias Bias
(section 6.12)
CH Calibration
(section 6.13)
CH Level Alarm
(section 5.2)
CH Unit
(section 5.3)
mm/h
(section 5.4)
(Date/Time)
(section 5.5)
Trend
(section 6.1)
Zone
(section 6.4)
Partial
(section 6.5)
Print out
(section 6.6)
Tag
(section 6.7)
Message
(section 6.8)
Chart 2
(section 6.9)
Moving_AVE
(section 6.3)
Filter
(section 6.2)
Alarm delay time
(section 6.10)
Brightness
(section 6.11)
DST
(section 6.16)
Formula
(section 9.2)
Unit
(section 9.3)
Constant
(section 9.4)
Alarm
(section 9.5)
TLOG
(section 9.6)
Aux
Batch No.
(section 6.14)
Lot No.
(section 6.14)
Detail
(section 6.14)
MSG format
(section 6.15)
Common Operations and Menu Structure
Range Span_left Span_right
Range Span_left Span_right
Range Span_left Span_right
Span_left Span_right Scale_left
Type Range Span_left
Ref.CH Span_left Span_right
Range Span_left Span_right
Range Span_left Span_right
1 datums 1 revise 2 datums
Type Value Relay
Mode
CH Left Right
CH Partial Expand Boundary
CH Trend Periodic
CH Tag
Message number (Message)
mm/h
CH Number of samples
CH Response Time
CH Duration
Display Light
DST Start month Start day
CH Mode formula Span left
CH Unit
Nomber K##
CH Level Alarm Type
CH Timer number SUM scale
Zone CH Left Right
(section 9.7)
Partial CH Partial
(section 9.8)
Print out CH Trend
(section 9.9)
Tag CH Tag
(section 9.10)
Alarm delay time CH Duration
(section 9.11)
Start Comment Line No.
Print Batch Name
Action Feed
End Comment Line No.
Print Batch Name
Action Feed
Start2 Same as Start.
End2 Same as End.
Message No. (Message format)
Scale_right Low-cut
Span_right Scale_left Scale_right
Scale_left Scale_right
2 revise Decision
Relay number
Key operation
Hold down the MENU key for 3 seconds
in Operation mode to enter Setting mode.
: Use the key.
: Use the key.
Hold down the MENU key for 3 seconds
in Setting mode to return to Operation mode.
Hold down both the
for 3 seconds in Setting mode to enter
Basic Setting mode.
are not displayed in the default condition.
To display these items, settings must be changed in
Basic Setting mode.
Start time End month End day
Span right
Value Relay Relay number
Boundary
Periodic
(Comment)
Chart Speed Clock
Date/Time
(Comment)
Chart Speed Clock
Date/Time
Auto inc. POC output
Firmware version: 1.31
Low-cut Low-cut point
and keys
End time
POC speed
25