Changing The Displayed Items Of Numeric Data - YOKOGAWA WT3002E User Manual

7.4

Changing the Displayed Items of Numeric Data

Procedure
VOLTAGE RANGE
ELEMENT
1 2
3 4
ELEMENT
ALL
COMPEN
MEASURING
RMS MEAN
WIRING
INPUT INFO.
RESET SET
Cursor keys
PAGE PAGE
Changing the Displayed Items Using the Function Select Key
7-16
MODE AUTO
DC RMEAN
DISPLAY ITEM & ELEMENT
NUMERIC WAVE U / I / P
WP/q/
OTHERS
TIME
ITEM FORM USER
LOWER ITEM LOWER FORM USER SET
Function select keys
• Check that display mode is set to Numeric, Numeric+Wave, or Numeric+Trend. For
details on how to set the display mode, see section 7.1.
• The following procedures are given as typical examples in which the display mode is
set to Numeric.
There are four ways to change the displayed items of numeric data. For the procedures
of each method, see the pages indicated below.
• Selecting the displayed items using the function select key
• Using the preset key
• Using the USER key
• Selecting the displayed items from the menu
• Selecting the harmonic order on the ALL display
• Resetting the order of the displayed items
• Using the Preset Key
The display of measurement functions of U, I, P, S, Q, λ, φ, WP, q, TIME, FU, FI, and
η and the element/wiring unit can be changed using function select keys.
• Selecting the Item to Be Changed
1.
Press ESC to clear the Numeric Form menu.
2.
Press the cursor keys to select the item to be changed. The item to be changed
is highlighted.
• If the display mode is set to Single List or Dual List, move the cursor to the center or
the right side of the screen.
CURRENT RANGE
MEASURING
MODE
RMS MEAN DC RMEAN
UPDATE
HOLD
RATE
SINGLE
CAL
ELEMENT INTEG
START STOP
ALL
To exit the menu during
EXT SENSOR
operation, press ESC located
SENSOR RATIO
above the soft keys.
In the procedural explanation
below, the phrase "press the
cursor keys" may be used.
This phrase refers to the
AUTO
procedures for selecting
items and entering values
and character strings. For
details on the procedures,
see section 3.14 in the User's
REMOTE
Manual, IM WT3001E-01EN.
LOCAL
SHIFT
See page 7-16.
See page 7-17.
See page 7-18.
See page 7-19.
See page 7-19.
IM WT3001E-51EN