Table of Contents
Advertisement
8.3 Selecting the Wide Bandwidth Harmonic Measurement Mode and Displaying Numeric Data
Explanation
8-4
• Enabling Wide Bandwidth Harmonic Measurement Mode
If normal measurement mode is enabled, switch to wide bandwidth harmonic
measurement mode.
2.
Press HRM SET to display the Harmonics menu.
3.
Press the Freq Band soft key to select Wide.
• Meaning of the Measurement Function Symbols
The symbols are the same as the harmonic measurement in normal measurement
mode. See section 7.2. The exceptions are the rms voltage and current. The order
section is (Total), not (---). For details, see section 7.1.
• Selecting the Display Mode and Measurement Mode
You can select the display format of the numeric data from the list below. [-------] (no
data) is displayed in places where the measurement function is not selected or where
no numeric data is present.
• Displaying the Numeric Data on the Entire Screen
Press the NUMERIC key to display the numeric data on the entire screen.
• Displaying Numeric Data by Dividing the Screen into Halves (Split Screen)
• Numeric+Bar
The numeric data and bar graph are displayed separately in the top and bottom
windows. For details on how to set the bar graph display, see section 7.9.
• Numeric+Wave and Numeric+Trend
Waveform and trend cannot be displayed, because there is no waveform data or
trend data.
For details on selecting the measurement mode, see section 3.16 in the User's
Manual IM WT3001E-01EN.
IM WT3001E-51EN
Advertisement
Table of Contents
