Display Unit Setting Methods; Display Mode → Setting Mode - YOKOGAWA ADMAG AXR User Manual

5.2

Display Unit Setting Methods

NOTE
Before changing any settings, be sure to check the corresponding setting details in Chapter 6.
5.2.1 Display Mode → Setting Mode
Display Mode will be adopted when the power is turned on, and the Setting Mode can be activated using the
following procedure.
SET
(2 seconds or more)
Display Mode
Select "No"
Sample Display: Procedure for moving from Display
Mode to Setting Mode
Start:
Display Mode
ESC
0
DEC
ESC
<5. BASIC OPERATING PROCEDURES
Select "Yes"
Major Item Parameter
Entry Mode
Search Mode
ESC
Setting switches
SET
100.0
FR
m 3 /h
100
3274m 3
FTL
/SHIFT
INC
SET DEC/SHIFT INC
SET
F0503-1.ai
(USING THE DISPLAY UNIT)
Parameter Search Mode
SET
Sub-item Parameter
Search Mode
ESC
Setting modes
* The term "mode" is used to read a situation
where display and setting are possible.
1st line: Actual instantaneous flow rate [FR]
2nd line: Bar graph indicating instantaneous flow rate
3rd line: Totalized forward flow rate [FTL]
Hold the
SET
>
SET
Parameter
Replacement Mode
ESC
F0502.EPS
switch for 2 seconds.
IM 01E30D01-01EN
5-3