Setting The Communication Timeout And Keepalive - YOKOGAWA Vigilantplant mR10000 User Manual

2.6 Setting the Communication Timeout and
Keepalive
Procedure
IM 04P01B01-17E
The communication timeout function and the keepalive function can be configured.
Setup Items
Ethernet Timeout
End K.Alive
For a description of the basic operations, see "Basic Key Operations" on page vi.
Entering Basic Setting Mode
Hold down the key for 3 seconds to display the Setting mode screen.
MENU
Next, hold down both the
display the Basic Setting mode screen.
Note
To cancel an operation, press the ESC key.
Communication Timeout
1. Press the key to select Ethernet and then press the
Basic=Ethernet
2. Press the key to select Timeout and then press the
Ethernet=Timeout
3. Press the key to select On and then press the
Timeout=On
4. Set the timeout time and then press the
The setting complete screen appears.
Key operations
• Use the key to select the digit for entering a value.
• Use the key to select the value you wish to enter.
Duration=
Ethernet timeout
Setting complete
5 Press the ESC key to return to the higher level menu. To save the settings and
exit from Basic Setting mode, proceed to "Saving the Settings."
* When the key, key, or
the operation is reversed as when the respective key is pressed by itself.
Timeout Duration
On/Off Timeout time
Keep alive
On/Off
( ) key and the (
DISP FUNC
key.
key is pressed while holding down the SHIFT key,
CHARACTER
) key for 3 seconds to
key.
key.
key.
2-11
2