Remote I/O Unit Connection System Drawing - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
10 Connection of Remote I/O Unit

10.1 Remote I/O Unit Connection System Drawing

This chapter describes the connection of the remote I/O unit and machine control signals.
10.1 Remote I/O Unit Connection System Drawing
Remote I/O unit
J070/J071
DCIN
J210
RIO1
J210
RIO2
J350/J351
CJ31/CJ33
J350/J351
CJ32/CJ34
CJ35
CJ36
SDI
SDI1/SDI2
SDO
SDO1/SDO2
J221
AIO1
THERMISTOR
AI
Note
(1) The mounted connector differs depending on the unit. Refer to the following chapter for which of the connector is
mounted.
"4.9 Remote I/O Unit"
(2) For connection to the machine operation panel, refer to the chapter "13 Connection of Machine Operation Panel".
IB-1501613-A
cable
24VDC Stabilized
power supply
Previous stage's remote I/O
cable
Remote I/O unit,
Control unit,
etc.
Next stage's remote I/O or terminator
cable
Remote I/O unit,
Operation panel I/O unit,
etc.
cable
Machine control panel,
etc.
cable
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
cable
Analog I/O
Thermistor
Multi-analog input
278