Connecting The Batteries; Control Unit Battery - Mitsubishi Electric M800VS Series Connection And Set Up Manual

Hide thumbs Also See for M800VS Series:

Table of Contents

M800VS/M80V Series Connection and Setup Manual

17 Setting the Hardware

17.5 Connecting the Batteries

The battery is not connected when the machine is delivered. Be sure to connect the battery before starting up.

Lithium batteries in the control unit battery holder retain parameters, machining programs and other data which require

backing up at power OFF.

Battery cumulative data holding time 45,000 hours (At 0 to 45 °C. The life will be shorter if the temperature is high.)

Battery life

[Precautions for handling battery]

 Do not disassemble the battery.

 Do not place the battery in flames or water.

 Do not pressurize and deform the battery.

 This is a primary battery so do not charge it.

Do not short-circuit, charge, overheat, incinerate or disassemble the battery.

IB-1501613-A

Approximately 5 years (from date of battery manufacture)