Install Start-Up Screen - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
18 Setting Up with M80/M800S SETUP INSTALLER

18.3 Install Start-up Screen

18.3 Install Start-up Screen
Carry out the procedures of this section to register custom start-up screen.
When you use standard start-up screen, there is no need to carry out the procedures.
(1) Press the [Custom Startup] menu.
-> The screen is changed to the start-up screen installation screen.
(2) Press the [Install] menu.
(3) When a confirmation message appears, press the [Yes] menu.
Note
 Do not power OFF during installation.
(4) When installation is finished, "Installation completed" appears.
Note
(1) To uninstall the startup screen data, press the [Uninst] menu instead of [Install] in the step (2).
(2) Installation or uninstallation is not executed when the [Yes] menu is pressed continuously after the previous installation or
uninstallation operation. Press Return key to return to the initial screen and start the procedure again.
411 IB-1501613-A