Connecting With Pulse-Controlled Inverter [M80V] - Mitsubishi Electric M800VS Series Connection And Set Up Manual

Hide thumbs Also See for M800VS Series:

Table of Contents

M800VS/M80V Series Connection and Setup Manual

7 Connection of Control Unit

7.7 Connecting with Pulse-Controlled Inverter [M80V]

Connect the pulse-controlled inverter to RIO1 and RIO2 connectors of the control unit.

Control unit

[Recommended wire material]

Wire material: HK-SB/20276XL Black LF 2P × 22AWG

Manufacturer: Taiyo Cabletec

[Related items]

Connector pin assignment: "4.4 Control Unit [M80V]" (RIO1/RIO2 connector)

(1) Connect the cable to the designated connector. Incorrect connections could damage the device.

(2) Do not connect or disconnect the cables between units while the power is ON.

(3) Use shielded cable and ground it in order to reduce noise interference.

Cable with shield

Maximum: 30m

Pulse-controlled inverter

IB-1501613-A