Handy Terminal Connection System Drawing; Connecting With Control Unit - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
14 Connection of Handy Terminal

14.1 Handy Terminal Connection System Drawing

This chapter briefly explains how to connect the handy terminal to each unit and device.
14.1 Handy Terminal Connection System Drawing
Handy terminal
G430
HOST

14.2 Connecting with Control Unit

Connect the handy terminal to SIO connector and ENC connector of the control unit.
Also, connect the emergency stop switch (SW1), enable switch (SW2), selector switch (SW) and 24 VDC input to the control
panel terminal block.
Control unit
ENC ENC SIO SIO
SIO SIO
ENC ENC
Control panel
terminal block
IB-1501613-A
Control unit
cable
SIO
ENC
G430 cable
Handy terminal
Connector name: HOST
FG FG
332