Mitsubishi Electric M800VS Series Connection And Set Up Manual page 414

M800VS/M80V Series Connection and Setup Manual
17 Setting the Hardware
17.5 Connecting the Batteries
 Installation procedure
(1) Check that the machine power is turned OFF. (If the power is not OFF, turn it OFF.)
(2) Confirm that the control unit LED, 7-segment display, etc., are all OFF.
(3) Open the front cover of the control unit.
(4) Fit the new battery into the battery holder.
(5) Insert the connector connected to the new battery into the BAT connector. Pay attention to the connector orientation: do
not insert backwards.
(6) Close the front cover of the control unit. At this time, confirm that the cover is closed by listening for the "click" sound
when the latch catches.
[M800VS]
BAT connector
Battery holder
[M80V]
BAT connector
Battery holder
Front cover
Battery
Front cover
Battery
383 IB-1501613-A