Mitsubishi Electric M800VS Series Connection And Set Up Manual page 67

M800VS/M80V Series Connection and Setup Manual
4 General Specifications
4.3 Control Unit [M800VS]
[Connecting a pulse-controlled inverter [M80V]]
For M80V, RIO1 and RIO2 connectors can be used as interfaces to output pulses. With this function, you can connect a
pulse-controlled inverter with RS422 interface to M80V.
Note
 When you use a function with pulse output, remote I/O unit cannot be connected to the RIO1 and RIO2 connectors.
RIO1
A
1 O A/PULSE/CW 1
2 NC 2
3 FG 3
<Pulse output specifications>
Number of control axes
Pulse output mode (*1)
Pulse output frequency
Pulse output signal
Differential output voltage
Signal voltage
Common mode output voltage
Output current
Cable length
(*1) The output signal logic type can be selected with the logic selecting function.
Pulse output mode
A
A*
A phase/B phase
B
B*
PULSE
PULSE*
PULSE/SIGN
SIGN
SIGN*
CW
CW*
CW/CCW
CCW
CCW*
IB-1501613-A
B
O A*/PULSE*/CW* 1 O B/SIGN/CCW
0 V 2
NC 3
One axis
A phase/B phase, PULSE/SIGN, CW/CCW
1 to 4,000,000 pulses per second
RS422 differential driver output
2.0 V or greater
3.0 V or less
250 mA in maximum
30 meters or less
Positive logic
Forward rotation Reverse rotation
Forward rotation Reverse rotation
Forward rotation Reverse rotation
RIO2
A B
1 O B*/SIGN*/CCW*
NC 2 0 V
FG 3 NC
Negative logic
Forward rotation Reverse rotation
A
A*
B
B*
Forward rotation Reverse rotation
PULSE
PULSE*
SIGN
SIGN*
Forward rotation Reverse rotation
CW
CW*
CCW
CCW*
36