Returning The Password To The Non-Input State (Operation Level 0 To 3); Changing The Operation Level To One Of 4 To 6 - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
37 Appendix 2: Protection Setting

37.2 Returning the Password to the Non-input State (Operation level 0 to 3)

Note
(1) For specifications on inputting and outputting files which are objects to be protected, refer to "Instruction Manual".
(2) The following operations can be performed at the protection level 6 or higher.
- Modal output, one-shot output and modal clear
- PLC-STOP
- S analog adjustment
- Absolute position setting
- Servo diagnosis
- Collection setting
- HMI ending
- Screen size change
- PLC indexing test Operation
37.2 Returning the Password to the Non-input State (Operation level 0 to 3)
Operation Methods
Press the menu [0-3 opn level].
(1)
Press the [Y] or [INPUT] key.
(2)

37.3 Changing the Operation Level to One of 4 to 6

Operation Methods
(Example) Change the operation level to "6"
Press the menu [4-6 opn level].
(1)
Enter the operation level to be changed to with a num-
(2)
ber.
(Example) 6 [INPUT]
Enter the password of the level to be changed.
(3)
The menu [0-3 opn level] is highlighted.
The operation message "Change opn. level back to 0 to 3?
(Y/N)" is displayed.
When the protection level setting is not saved, the opera-
tion message "Save the protective level setting? (Y/N)" is
displayed, and the above message appears after Y/N is en-
tered.
The operation message "Operation level has returned to 0
to 3." is displayed, and the highlighted menu [0-3 opn level]
returns to normal.
The operation level returns to one of operation levels 0 to 3
in accordance with the current signal status.
All menus are displayed in gray.
The menu [4-6 opn level] is highlighted.
The cursor appears on the current operation level.
The operation message "Select the opn. level to be
changed to." is displayed.
The operation message "Type in your password." is dis-
played.
<When the password is correct>
The operation message "Operation level has changed." is
displayed, and the operation level after the change is dis-
played in the current operation level field.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and the operation level returns to the previous
one.
In either case, the highlighted menu returns to normal, and
the cursor disappears.
589 IB-1501613-A