M800VS/M80V Series Connection and Setup Manual
10 Connection of Remote I/O Unit
10.9 Connecting with Analog I/O Signal (FCU8-DX202)
10.9 Connecting with Analog I/O Signal (FCU8-DX202)
For the analog input/output signals, connect J221 cable to the AIO1 connector of FCU8-DX202. The analog input/output
signals are available to connect up to four points for the input, and up to one point for the output.
J221
AIO1
[Related items]
Cable drawing: "15.2.17 J221 Cable"
Connector pin assignment: "4.9 Remote I/O Unit" (AIO1 connector)
299
IB-1501613-A