Mitsubishi Electric M800VS Series Connection And Set Up Manual page 161

M800VS/M80V Series Connection and Setup Manual
4 General Specifications
4.9 Remote I/O Unit
(20) THERMISTOR (Thermistor input)
Thermistor can be connected to this connector.
CH1 CH2 CH3 CH4
1
2
3
4
CH1 CH2
1 FG FG
2 NC NC
3 Thermistor CH1 Thermistor CH2
4 Thermistor CH1 Thermistor CH2
CH7 CH8
1 FG FG
2 NC NC
3 Thermistor CH7 Thermistor CH8
4 Thermistor CH7 Thermistor CH8
<Cable side connector type>
Connector: 37104-2165-000FL
Manufacturer: 3M
[Outline of the thermistor input circuit]
Thermistor
Shield
Measurement temperature
Resolution
Precision
Thermal responsiveness (*1)
Disconnection detection function
(*1) This indicates the maximum measurable temperature change amount per unit time.
When the temperature change exceeds the described value, it cannot be measured correctly.
Note
 Do not connect any thermistor other than PT3C-51F-M2 made by SHIBAURA ELECTRONICS Co., Ltd.
IB-1501613-A
CH5 CH6 CH7 CH8 CH9
CH3
FG
NC
Thermistor CH3
Thermistor CH3
CH9
FG
NC
Thermistor CH9
Thermistor CH9
THERMISTOR
Thermistor
Thermistor
-10 °C to +150.0 °C
0.1 °C
±1.5 °C (Measurement temperature -10 to +10 °C)
±1.0 °C (Measurement temperature +10 to +70 °C)
±1.5°C (Measurement temperature +70 to +110 °C)
±2.0 °C (Measurement temperature +110 to +130 °C)
±2.5 °C (Measurement temperature +130 to +150 °C)
This varies depending on the setting of the parameter (#1334).
±10 °C/s (When the setting of #1334 is "-1")
±20 °C/s (When the setting of #1334 is "0")
±45 °C/s (When the setting of #1334 is "1")
±90°C/s (When the setting of #1334 is "2")
Provided
CH10 CH11 CH12
CH4 CH5
FG FG
NC NC
Thermistor CH4 Thermistor CH5
Thermistor CH4 Thermistor CH5
CH10 CH11
FG FG
NC NC
Thermistor CH10 Thermistor CH11
Thermistor CH10 Thermistor CH11
3.3V
ADC
FG
130
CH6
FG
NC
Thermistor CH6
Thermistor CH6
CH12
FG
NC
Thermistor CH12
Thermistor CH12