5.9. Connect the communication cable Power Cabinet
The communication fiber cables to the ACS Control Module are only
connected within the primary HVC 150 Power Cabinet, see for more
details section Cabling on Page 49.
5.9.1. Route the cable to the terminal blocks
Preferred cable route
1.
Route the communication fiber cable to module D1 (B) and D2 (A). Refer to the figure for
the preferred cable route inside the cabinet (only within the HVC 150).
5.9.2. Connect the communication fiber cables
Preconditions:
Tools: tak-ty or ty-raps
Document: V1.2 / Document No.: 6AGA000008-0629-EN | Date: 06-30-2022
HVC‐PD E‐Bus Charger Installation Guide
NOTICE
Page 85 of 146