Close The Door Of The Acs Control Module; Place Back Cover Plate And Close Door Of The Charge Pole - ABB HVC-PD Installation Manual

5.16.14.

Close the door of the ACS Control Module

Preconditions:

Key
1. Close the door (A).
2. Close the locks (B).
5.16.15.

Place back cover plate and close door of the Charge Pole

Preconditions:

Key.

A minimum of two persons is required.

Tool: torx screwdriver (size 2163TX-T30).
1. Place back the cover plate (E) and tighten the M6 bolts (F) (4x).
2. Place back the U-profiles (C) on both side, and tighten the M6 bolts (D) (4x).
Document: V1.2 / Document No.: 6AGA000008-0629-EN | Date: 06-30-2022
HVC‐PD E‐Bus Charger Installation Guide
Page 118 of 146