Table of Contents
Advertisement
3.
Close the door (A) of the Charge Pole
4.
Locking the two lockers (B).
5.17.
Install cover plates
Preconditions:
Packing foil are removed from the plate work.
Tools: torx screwdriver (size 2163TX-T30).
1.
Put the two U-profile cover plates (B) against the bottom of the column (A).
2.
Insert the M6 bolts (C) into the holes (4x).
3.
Tighten the bolts.
Document: V1.2 / Document No.: 6AGA000008-0629-EN | Date: 06-30-2022
HVC‐PD E‐Bus Charger Installation Guide
Page 119 of 146
Advertisement
Table of Contents
