Connect The Communication Cable Power Cabinet; Route The Cable To The Terminal Blocks; Connect The Communication Fiber Cables - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide

5.9. Connect the communication cable Power Cabinet

The communication fiber cables to the ACS Control Module are only
connected within the master HVC 150 Power Cabinet, see for more
details section Cabling on Page 46.

5.9.1. Route the cable to the terminal blocks

Preferred cable route
1. Route the communication fiber cable to module D1 (B) and D2 (A). Refer to the figure for
the preferred cable route inside the cabinet (only within the HVC 150).

5.9.2. Connect the communication fiber cables

Preconditions:

Tools: tak-ty or ty-raps
Revision: 1.2
Date released: 16-08-2018
NOTICE
COMPANY CONFIDENTIAL
Page 80 of 128