Table of Contents
Advertisement
About This Chapter
This appendix provides an example of the usage of XtraDrive-DP
on a PROFIBUS network. First it shows how to use the S7 SIMATIC
Manager to define the parameterization and configuration
processes and then it shows how to implement the application
during data exchange.
Specifications
The following is a list of the system and application tasks to be
carried out in this example:
✦ The XtraDrive-DP will drive a rotary motor with 16-bit encoder.
✦ The master will instruct the XtraDrive-DP to perform the
following tasks:
❖ Make a movement of 34.7 degrees at a speed not higher
than 1000 RPM.
❖ At the end of the movement, the XtraDrive-DP output #1
(CN1-25, 26) will be set to HIGH.
✦ An S7 SIMATIC Manager is used on the network.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Web : http: www.audin.fr - Email : info@audin.fr
Example of Using
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20
Example of Using XtraDrive-DP
Appendix E
XtraDrive-DP
75
A
E
PPENDIX
Advertisement
Table of Contents
