Table of Contents
Advertisement
About This Manual
ix
CAUTION
Do not connect three-phase power supply to XtraDrive output terminals U, V,
and W.
Failure to observe this caution could result in personal injury or fire.
Securely tighten screws on the terminal block and ground terminals of power input
and motor connections.
When using a 400V XtraDrive, the amount of current leaking from the power line
increases. Therefore, use cables and isolation materials rated for 400V, and keep
the wires as short as possible.
Inspection and Maintenance
WARNING
Be sure to turn power OFF before inspection or maintenance.
Failure to observe this warning could result in electric shock.
Never open the terminal cover while power is ON, and never turn power ON when
the terminal cover is open.
Failure to observe this warning could result in electric shock.
After turning power OFF, wait at least five minutes before servicing the product.
Failure to observe this warning could result in residual electric charges causing
electric shock.
CAUTION
Never change wiring while power is ON.
Failure to observe this warning could result in electric shock or personal injury.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20
Web : http: www.audin.fr - Email : info@audin.fr
Advertisement
Table of Contents
