Setting Parameters During Data Exchange; Setting Parameters With Xtraware - YASKAWA XtraDrive Series User Manual

XtraDrive-DP User Manual
38
Setting Parameters During Data
Exchange
Using this method, you can modify parameters using the SET_PAR
command during data exchange. To enable the ability to set
parameters during data exchange, you must first select the
Command module during configuration. Then, during data
exchange, you use the SET_PAR command to change selected
parameters. See Command on page 27 for further details.

Setting Parameters with XtraWare

XtraWare is an advanced PC-based software tool that can be used
to change parameters. An overview of XtraWare's functionality is
provided in Appendix D, Working with XtraWare.
NOTE:
✦ Only XtraWare may change password-protected parameters.
✦ XtraWare may not change parameters that have been set and
configured with the PROFIBUS DP configuration tool.
XtraWare can be downloaded from YET's website:
www.yetmotion.com.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20
Web : http: www.audin.fr - Email : info@audin.fr