YASKAWA XtraDrive Series User Manual page 63

Module Name
Pn508: Brake Reference
On Time
Pn509: Momentary Hold
Time
Pn600: Regenerative
Resistor Capacity
Pn502: Rotation Detection
Level
Pn504: /NEAR Signal
Width
Pn500: Positioning
Completed Width
Pn503: Speed Coincidence
Signal Output Width
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Web : http: www.audin.fr - Email : info@audin.fr
Timing for brake reference output during
motor operation
Momentary Hold Time: This parameter
determines if an alarm is generated
when a power loss occurs.
Regenerative Resistor Capacity: This
parameter specifies the capacity for an
external regenerative resistor.
Rotation Detection Level: This
parameter sets the speed at which the
servo amplifier determines that the
servomotor is running and, if so, to
output an appropriate signal.
/NEAR Signal Width
Positioning Completed Width: This
parameter sets the number of error
pulses and adjusts the output timing of
the positioning completed signal.
Speed Coincidence Signal Output
Width: This parameter sets the required
conditions for speed coincidence output.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20
XtraDrive-DP Parameters List
A
PPENDIX
Description
51
B