Labrie EXPERT Maintenance Manual page 64

54 General Maintenance
Figure 3-32 Floating panel assembly
Bolts (2)
Transversal beam
6 bolts are to be taken out including 2 carriage bolts to remove the beam and unloose the central
cover (see Figure 3-32).
4.
Remove the upper part of both side rails (one on each side of the hopper).
6 bolts are to be taken out to remove this section of the side rail (see Figure 3-33).
Figure 3-33 Bolts to be taken out to remove upper part of side rail
5. Start the engine and engage the hydraulic pump.
Carriage bolt
Carriage bolt
LHS floating panel
Central cover
RHS floating panel
Bolts (2)