Labrie EXPERT Maintenance Manual page 147

An R-pin located just behind the anti-spill guard (see Figure 3-181) must be pulled completely to
allow for the removal of the guard.
Figure 3-180 Anti-spill guards
Figure 3-181 R-pin holding anti-spill guard in place
8. Remove the deflector panel.
Use a ¾-inch wrench to remove the 4 bolts that hold the panel.
Figure 3-182 Deflector panel
9.
Remove the transversal beam by taking out the 4 bolts (2 on each side) that retain it.
General Maintenance 137