Labrie EXPERT Maintenance Manual page 415

Figure 10-41 Wear pad B
5. Remove wear pad C (2 bolts) and replace it by a new one.
Figure 10-42 Wear pad C
As dust particles and sand stick to grease, never lubricate the H
I :
MPORTANT
pads. If you do, this may jam the moving parts and/or cause premature wear.
6. Remove wear pad D (2 bolts) and replace it by a new one.
Figure 10-43 Wear pad D
7. Remove wear pad E (4 bolts) and replace it by a new one.
Lifting Arms 407
-H ™ automated arm wear
ELPING AND