Labrie EXPERT Maintenance Manual page 198

188 General Maintenance
15. Remove the upper part of both side rails (one on each side of the hopper) [see Figure 3-273].
4 bolts are to be taken out to remove this section of the side rail.
Figure 3-273 Side rail
16. Remove all panel rollers from the follower panels and replace them with new ones. To do so:
Flip the top follower panel backward (panel nearest the arm) [see Figure 3-274].
16 a.
Figure 3-274 Packer and follower panels
Remove both rollers (one on each side of the top follower panel).
16 b.
Using a 5⁄16-inch Allen wrench and a 3⁄4-inch box, remove all 4 bolts that keep the roller in
place (see Figure 3-275).
Side rail
Packer
Bottom follower panel
RHS roller retaining bolts
Bolts that hold the
upper part of the
side rail in place
LHS roller retaining bolts
Top follower panel