Labrie EXPERT Maintenance Manual page 372

364 Multiplexing
To choose a particular module, use the up/down arrows to select it and press "OK".
N : Entering "OK" can be done two ways: press either the far right button or the "OK" button.
OTE
Press "Esc" to return to the preceding page.
Figure 9-8 Module I/O Status page
Input Status
The Input Status page is accessible from the Module I/O Status page. After selecting the desired
module and pressing "OK", the Input Status page of the selected module is displayed (see Figure
9-9).
Figure 9-9 Input Status page
The Input Status page contains a set of rectangles. Each of these rectangles represents input elements,
which in turn correspond to a particular function of the truck. For example, if you select rectangle I00,
a short description appears in the lower part of the screen, which indicates that this rectangle relates
to the input element coming from the service brake pressure switch.
11: Display
50: Right Hopper 1
60: Right Hopper 2
127-72: Joysticks
J1939