Labrie EXPERT Maintenance Manual page 43

8. Push the green S
red emergency S
Figure 3-7 S C and S
TART YCLE
Start Cycle
button
9.
Lock out and tag out the vehicle (see Locking Out and Tagging Out the Vehicle on page 14).
10.
Open the clean-out trap door on both sides of the hopper.
11.
Clean all accumulated dirt under the cylinders and inside the side rails (see Figure 3-8) through
the clean-out traps using the provided hoe (see Figure 3-9). Use pressurized water if necessary.
Figure 3-8 View through the right-hand side clean-out trap (packer extended)
Cylinders
C button (see Figure 3-7) to fully extend the packer, then push the
TART YCLE
button (see Figure 3-7) when the packer is fully extended.
TOP
buttons
TOP
General Maintenance 33
Stop button
Cylinder
Side rail
bracket