Once the protective cover is removed, you will be able to access the area where the chute cylinder
is.
7.
Check for leaks on cylinder head, jacket and rod.
Figure 3-117
Chute cylinder
8.
By using a straight edge, check the cylinder rod to make sure it is straight.
9.
Lubricate the 2 grease fittings on the cylinder, one at the base end, the other at the rod end
(see Figure 3-118).
Figure 3-118
Chute cylinder
: Proceed the same with the other chute cylinder if the truck is equipped with a dual or split
N
OTE
chute.
Cylinder head
Cylinder rod
Rod end
Base end
General Maintenance 99
Cylinder jacket
Chute