Labrie EXPERT Maintenance Manual page 153

Figure 3-192 Bolts to be taken out to remove upper part of side rail
10.
Start the engine and engage the hydraulic pump.
11.
Retract the packer to mid-stroke position.
Danger!
Do not enter the hopper while the packer is moving.
12. Turn OFF the hydraulic pump and the engine.
13. Lock out and tag out the vehicle (see Locking Out and Tagging Out the Vehicle on page 14).
14. Remove both side panels (one on each side of the hopper).
Figure 3-193 Side panel
: If a tipper is installed on the side panel, you will have first to remove it before removing the side
N
OTE
panel.
General Maintenance 143