Labrie EXPERT Maintenance Manual page 364

356 Multiplexing
Table 1 Warning messages (cont'd)
Warning and Caution Messages
Packer:Already Extended
Packer:Already Retracted
Packer:Extend Too Long
Packer:Pump Not Started
Packer:Retract Too Long
Packer:Tailgate Not Open
Packer:External Control
Pump Not Started:Cab EStop
Pump Not Started:Hopper Door Not
Closed
Pump Not Started:Left Cab Estop
Pump Not Started:Left Panic
Pump Not Started:Main Air Pressure
Pump Not Started:Right Cab Estop
Pump Not Started:Right Panic
Pump Not Started:RPM Too High
Pump Stop:Main Air Pressure
Pump:Aux. AutoDump Switch ON
Pump:Aux. ChuteToLeft Switch ON
Pump:Aux. ChuteToRight Switch ON
Pump:Aux. CloseGripper Switch ON
Pump:Aux. Deadman Switch ON
Solution
Refer to Maintenance Personnel or
LabriePlus
Refer to Maintenance Personnel or
LabriePlus
Check Extend Prox
Engage Pump
Check Retract Prox
Open Tailgate
Deactivate External Control
Pull Out Cab EStop Button
Close Hopper Door
Pull Out Left Cab EStop Button
Release Left Panic Bar
Let the Air Build Up to Required
Pressure
Pull Out Right Cab EStop Button
Release Right Panic Bar
Lower Engine Speed Below
900 RPM
Let Air Build Up to Req'd Pressure
Release Aux. AutoDump Switch
prior to Engaging Pump
Release Aux. ChuteToLeft Switch
prior to Engaging Pump
Release Aux. ChuteToRight Switch
prior to Engaging Pump
Release Aux. CloseGripper Switch
prior to Engaging Pump
Release Aux. Deadman Switch prior
to Engaging Pump