Labrie EXPERT Maintenance Manual page 126

116 General Maintenance
Figure 3-145 Wear pads, sliding shoe and exterior guide (schematic view)
Sliding shoe
N : If you only need to replace the sliding shoe (see Figure 3-146), all you have to do is remove the
OTE
exterior guide and 2 wear pads (one from each rail section).
Figure 3-146 Sliding shoe
11. Proceed with the installation of the new wear pads and sliding shoe. To do so:
Insert 1 bolt into hole in both lower and upper sections of the rail for easy wear pad
11 a.
installation.
Install 2 wear pads in both upper and lower sections of the rail (the shorter ones to be
11 b.
placed in lower section).
Wear pads
Exterior
guide