Labrie EXPERT Maintenance Manual page 133

Figure 3-159 Capped hoses and fittings
7.
Clearly identify the disconnected hoses and fittings to avoid mix up during reconnection.
Use of color-coded tie wraps (see illustration below) is appropriate for such purposes.
Figure 3-160 Color-based identification
8.
Push the hoses away to facilitate cylinder removal.
Figure 3-161 Pushing away hoses
9.
Remove all 4 bolts that hold the cylinder front-end pin in place (see Figure 3-162).
General Maintenance 123
Capped
fittings
Capped
hoses